| Step | | Procedure & Parts & Tools |
| 1 |
|
EMPTY BOTH TANKS. LOCATE THE MACHINE TOOL THAT WAS ATTACHED TO THE KEY RING OF YOUR MACHINE. THIS TOOL WILL BE USED TO OPEN THE MACHINE. IF YOU DO NOT HAVE THIS TOOL, YOU CAN USE A LONG FLAT TIP SCREWDRIVER.
|
| 2 |
|
LOCATE THE LABEL ON THE LEFT SIDE OF MACHINE (STANDING IN OPERATOR POSITION). FOLLOW THE DIRECTIONS ON THE LABEL TO OPEN THE MACHINE.
|
| 3 |
|
FOLLOWING THE DIRECTIONS ON THE LABEL, INSERT THE MACHINE TOOL INTO THE MACHINE.
|
| 4 |
|
LOCATE THE SOLUTION PUMPS ON THE FRONT OF THE MACHINE.
|
| 5 |
|
DISCONNECT THE 2 WIRE CONNECTORS ON EACH OF THE SOLUTION PUMPS.
|
| 6 |
|
SLIDE THE SOLUTION PUMP OUT OF THE MACHINE.
|
| 7 |
|
REMOVE BOTH HOSE CLAMPS TO REMOVE BOTH SOLUTION HOSES FROM THE SOLUTION PUMPS. REVERSE STEPS 3 THRU 7 TO INSTALL NEW SOLUTION PUMPS. NOTE: THE BLACK RUBBER END OF THE SOLUTION PUMP WILL BE AT THE TOP WHEN INSTALLING THE NEW PUMPS.
| Screwdriver-flat tip |
|
|